The pickup test function enables users to check and edit pickup positions in jobs on the machine prior to starting production. By doing this, pickup errors that occur during the beginning of production can be greatly reduced. There are two pickup items that can be tested. The pickup X- and Y-positions can be checked and […]
Category Archives: SMT Machines MRO
Use this mode to perform a check of the pickup data, vision data, carrying data, part types, placing data, actual placing conditions, and orientation. Starting place & check mode. 1. Transmit the job to be tested to the machine and wait for the main screen to display on all of the operation panels for the […]
Use this mode to perform a basic check of the part types, placing positions and orientation. Starting simulation mode. 1. Transmit the job to be tested to the machine and wait for the main screen to display on all of the operation panels for the modules. 2. Start MEdit and log on if necessary. 3. […]
12
Jun
Jun
The job test function enables users to view and edit jobs on the machine prior to starting production. By doing this, errors that occur during the beginning of production for a new job can be greatly reduced. There are two job test modes and the items checked by each mode are different. Information about these […]
11
Jun
Jun
By following the procedures below, the job in the global directory that matches the job that is currently in the machine is opened. When this is performed, changes made to the job can be sent to the machine as well as being saved in the global job. Note: It is possible to open the same […]
10
Jun
Jun
The edited data was saved to the job in the global job directory by using the Update Shape Data command in VPDplus. In order to use this newly edited vision data at the machine, it must be sent to the machine. Use MEdit to open the current job for the module with the part and […]
09
Jun
Jun
If VPDplus and VPDplus Launcher have been installed on the computer accessing the Accessory Software, then it is possible to open and edit the vision data for the part using VPDplus and then reflect any changes back to the job in the server. It is important to note the following two points. VPDplus must be […]
08
Jun
Jun
Once an error image has been sent to Accessory Software, it can be displayed in any client accessing Accessory Software. The details of the error and the image are displayed by following the procedures below. 1. From Floor Monitor, select the module from which to view error images and then click the vision processing error […]
05
Jun
Jun
From NXT V2.81 and higher, it is possible to make settings that if a vision error occurs for a particular feeder position, then the vision error image will automatically be sent to the Accessory Software Server. In Accessory Software, the image can then be opened with VPDplus and used to check the error condtion and […]
04
Jun
Jun
Use this function to skip using a holder for a head on a module. This function makes it possible to not use a specified holder in order to avoid using a holder at which frequent errors occur during production or for which air leakage or clogging problems prevent normal use. In addition, the holder skip […]