5.3.1 Changing The Current Job Of 5.3 General Procedures For 5. Transmission On Fuji NXT
The current job is the job that is used when production is started. The other job for the selected lane is considered to be the...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
5.2.3 Using [Transmit] To Transmit Of 5.2 Transmitting For 5. Transmission on FUJI NXT
Follow the procedures below to transmit a job from within Director using the [Transmit] command. 1. Select [Transmit] – [Job…] from the [Tools] menu in...
Read Article → 5.2.2 Dragging And Dropping Jobs To Transmit Of 5.2 Transmitting For 5. Transmission on FUJI NXT
Follow the procedures below to transmit a job to the NXT by dragging and dropping the job in the Transmission Control view. 1. With the...
Read Article → 5.2.1 Transmitting A Job From Job Builder Of 5.2 Transmitting For 5. Transmission on FUJI NXT
Follow the procedures below to transmit a currently opened global job to the NXT from within Job Builder. Be sure to save the job before...
Read Article → 5.1 Introduction of 5. Transmission on FUJI NXT SMT Equipment
Transmission is used to send data between Fuji Flexa and the FUJI NXT machines. The most common use of Transmission is to send jobs to...
Read Article → 4.7.3 Procedure for Entering overrides in part data of 4. Part Data Settings
1. Open the shape data (or part data if using non-relational mode) for the part data for which input is required in Fuji Flexa. 2....
Read Article → 4.7 Compatibility with Existing Part Data of 4. Part Data Settings
4.7.1 Background Existing Fuji machines support both backlight and frontlight systems, however, the newly developed NXT machines support frontlight only. As a result, it is...
Read Article → Case 4: White Body But Partly Black On FUJI NXT Platform
Case 4 for 4.6.3 Selecting A Vision Type Flowcharts (Leaded Parts) of Part Data Settings Figure 2: Example of left to right symmetrical part and...
Read Article → Case 3: Black Body With Partial White Or There Is A Metal Part In Addition To The Lead
Case 3 for 4.6.3 Selecting A Vision Type Flowcharts (Leaded Parts) of Part Data Settings Figure 1: Example of rectangular shaped leads and Example of...
Read Article →