6.7 Testing Skip Mark Data In The Job Of 6. Editing Jobs on the Machine on FUJI NXT
It is possible to test the skip mark data in a job for board skip marks and global skip marks. It is important to test...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
6.6.4 Feeder Index Count And Tape Return Method For Pickup Tests For 6.6 Testing Pickup Positions (NXT V3.20 and higher) Of 6. Editing Jobs on the Machine on FUJI NXT
When performing a pickup test, it is necessary to index the parts because the test does not automatically index them and there are certain cases...
Read Article → 6.6.3 Testing Pickup Positions In A Tray For 6.6 Testing Pickup Positions (NXT V3.20 and higher) Of 6. Editing Jobs on the Machine on FUJI NXT
Use this to check and edit the pitch, X-, Y-, and Z-positions for picking parts in feeders. Starting the pickup test. 1. Transmit the job...
Read Article → 6.6.2 Testing Pickup Positions In A Feeder For 6.6 Testing Pickup Positions (NXT V3.20 and higher) Of 6. Editing Jobs on the Machine on FUJI NXT
Use this to check and edit the X-, Y-, and Z-positions for picking parts in feeders. Starting the pickup test. 1. Transmit the job with...
Read Article → 6.6.1 Introduction of 6.6 Testing Pickup Positions (NXT V3.20 And Higher) On FUJI NXT
The pickup test function enables users to check and edit pickup positions in jobs on the machine prior to starting production. By doing this, pickup...
Read Article → 6.5.3 Testing A Job Using Place & Check Mode For 6.5 Testing Jobs (NXT V3.10 And Higher) Of 6. Editing Jobs On The Machine on FUJI NXT
Use this mode to perform a check of the pickup data, vision data, carrying data, part types, placing data, actual placing conditions, and orientation. Starting...
Read Article → 6.5.2 Testing A Job Using Simulation Mode For 6.5 Testing Jobs (NXT V3.10 And Higher) Of 6. Editing Jobs On The Machine on FUJI NXT
Use this mode to perform a basic check of the part types, placing positions and orientation. Starting simulation mode. 1. Transmit the job to be...
Read Article → 6.5.1 Introduction For 6.5 Testing Jobs (Nxt V3.10 And Higher) Of 6. Editing Jobs On The Machine on FUJI NXT
The job test function enables users to view and edit jobs on the machine prior to starting production. By doing this, errors that occur during...
Read Article → 6.4 Opening A Job That Is In The Machine Of 6. Editing Jobs on the Machine On FUJI NXT
By following the procedures below, the job in the global directory that matches the job that is currently in the machine is opened. When this...
Read Article →