SMT Industry Blog & Knowledge Base

Chapter 1. Features and Scope of Equipment “Overview“ includes features, specifications, names, functions, auxiliary equipment, installation, and production preparation procedures of the CP Series. Full...

Alarm Display: A.730 Alarm Name: Dynamic Brake Overload 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: A SERVOPACK...

Alarm Display: A.720 Alarm Name: Continuous Overload 1. Situation at Alarm Occurrence: Occurred when the servo was turned ON. Cause: The encoder wiring is incorrect...

Alarm Display: A.710 Alarm Name: Momentary Overload Situation at Alarm Occurrence: Occurred when the control power supply was turned on. Cause: A SERVOPACK board fault...

Alarm Display: A. 520 Alarm Name: Vibration Alarm Situation at Alarm Occurrence: Vibration Alarm Occurred while the servomotor was running. Cause: Abnormal vibration was detected....

Alarm Display: A. 511 Alarm Name: Dividing Pulse Output Over Speed Situation at Alarm Occurrence: Occurred while the servomotor was running. Cause: The output frequency...

Alarm Display: A. 510 Alarm Name: Over speed 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: A SERVOPACK...

The following table lists the current compatibility of AVL data. Item #1 Fuji Flexa | AVL Comp.: Yes | Description: Fuji Flexa V2.0.1 or higher...

#1 P/N: J90551006A | Nozzle CN020 ASSY #2 P/N: J9055133C | Nozzle CN030 ASSY #3 P/N: J9055134C | Nozzle CN040 ASSY #4 P/N: J9055136C |...