SMT Industry Blog & Knowledge Base

Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.

July 31, 2020 • By admin

1.2.4.2. The Pick & Place Cycle Time For Each Model For 1.2.4. The Pick & Place Cycle Time Of 1.2. Applicable Components and Packages on Samsung CP-45F(V)/FS

Table 1-5. The pick & place Cycle Time for Each Model Classification 1: Chip CP-45FV: 0.197sec / component(1608) Classification 2: QFP CP-45FV: 0.75 sec /...

Read Article →

July 30, 2020 • By admin

1.2.4.1. General Features For 1.2.4. The Pick & Place Cycle Time Of 1.2. Applicable Components and Packages on Samsung CP-45F(V)/FS

Figure 1-2. The Summary for Measuring the Tact Time (6 Heads Simultaneous Pickups, Each heads place) 1.2.4. The Pick & Place Cycle Time The descriptions...

Read Article →

July 29, 2020 • By admin

1.2.3. The Placement Precision For 1.2. Applicable Components and Packages on Samsung CP-45F(V)/FS

The placement precision for applicable components type is shown in Table 1-4, and is applicable to general components usage as well. Table 1-4. The placement...

Read Article →

July 28, 2020 • By admin

1.2.2.2. Stage Vision Recognition System(For CP-45FV /45FS) Of 1.2.2. Applicable Component Sizes For 1.2. Applicable Components and Packages on Samsung CP-45F(V)/FS

Table 1-3. Applicable Component Sizes (Vision Recognition System) 1. Classification: IC , Connector. (1)Standard FOV35mm 17mm: 0.3 mm pitch 32mm: 0.4 mm pitch 40mm: 0.5...

Read Article →

July 27, 2020 • By admin

8.4.1 Creating IDs For 8.4 Creating Relationships Between Feeders and Reels Of 8. Fujitrax Verifier on FUJI NXT

This is used to just create an relationship between the part and the feeder in which the part is set. An ID can be created...

Read Article →

July 24, 2020 • By admin

1.2.2.1. Flying Vision Recognition System Of 1.2.2. Applicable Component Sizes For 1.2. Applicable Components and Packages on Samsung CP-45F(V)/FS

The sizes of components applicable to this equipment are prescribed in Table 1-2, and is applicable to general components usage as well. Table 1-2. Applicable...

Read Article →

July 23, 2020 • By admin

1.2.1. Configuration of the head and vision recognition system of 1.2. Applicable Components and Packages for Samsung CP-45F(V)/FS

1.2.1. Configuration of the head and vision recognition system The vision recognition systems of the CP-45F/V and CP-45FS related to the components placed are as...

Read Article →

July 22, 2020 • By admin

8.4 Creating Relationships Between Feeders and Reels of 8. Fujitrax Verifier on FUJI NXT

It is essential to create IDs or to perform a quick verify before setting parts on a machine. Creating IDs and performing a quick verify...

Read Article →

July 21, 2020 • By admin

Explanation of Terminologies For Samsung Component Placer CP45NEO Series

The machine models are CP45F NEO, CP45FV NEO, CP45FSNEO, CP45FSV NEO, CP45F-L NEO, CP45FV-L NEO, CP45FSL NEO and CP45FSV-L NEO, and CP45F-L NEO, CP45FV-L NEO,...

Read Article →

← Prev 1 … 54 55 56 57 58 … 115 Next →

SMT Industry Blog & Knowledge Base

SMTBOX Assistant