Case: 2 Entire Body Color Is White Or Light Color (White, Red, Orange, Brown, Yellow)
Case 2 for 4.6.3 Selecting A Vision Type Flowcharts (Leaded Parts) of Part Data Settings Figure 4 Parts That Have Leads In The White Body...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
4.6.3 Selecting A Vision Type Flowcharts (Leaded Parts) of Part Data Settings
Case 1: Entire body color is black or a dark color (black, blue, green or yellow green) Figure 1: Example of rectangular shaped leads Example...
Read Article → Vision Type 252 White Bodied Parts For NXT Vision Types Of Part Data Settings On Fuji NXT
This vision type is used for those parts with a white or gold colored body, and processes only the part outline. It is necessary to...
Read Article → Vision Type 230 (235) Black Bodied Bgas, 231 (236) White Bodied Bgas, 233 (238) Black Bodied Csps & 234 (239) White Bodied Csps
Enter the part body size and element information in part data. Vision types 230, 231, 233, and 234 use the body center while vision types...
Read Article → Vision Type 181 Coil Parts With Two Leads At 45 Degree Angles For NXT Vision Types Of Part Data Settings On Fuji NXT
Use this vision type for coil parts with 2 leads that are at 45 degree angles from the x-axis (as shown below). The body color...
Read Article → Vision Type 180 (185) Sot-Type Parts For NXT Vision Types Of Part Data Settings On Fuji NXT
Use this vision type for parts with between 2 and 6 leads where the body color is black and only the leads are visible during...
Read Article → Attachments On Yamaha I-Pulse M4S Chip Mounter
1. Nozzle with ID Marks M001 LG0-M7701-00 M002 LG0-M7703-00 M003 LG0-M7705-00 M004 LG0-M7707-00 M005 LG0-M7709-00 M006 LG0-M770B-00 M012 LG0-M770D-00 M013 LG0-M770F-00 M017 LG0-M770H-00 M018 LG0-M770K-00...
Read Article → 5. Options On Yamaha I-Pulse M4S Chip Mounter
1) Parts Feeders F1-82-0603 8mm tape, 2mm index, for 0603 (0201) F1-82-1005 8mm tape, 2mm index, for 1005 (0402) F1-84 8mm tape, 4mm index F1-12...
Read Article → 4.8 Conditions For Installation On Yamaha I-Pulse M4S Chip Mounter
Power Supply: Only the secondary side is factory-prepared. The power cable (VCT 4×3.5mm2 or equivalent) to the terminal block of the machine is to be...
Read Article →