SMT Industry Blog & Knowledge Base

Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.

January 10, 2020 • By admin

Vision Type 151 (156) Black Connectors Placed Using A Mechanical Chuck For NXT Vision Types Of Part Data Settings On Fuji NXT

Enter the body size and element information in part data. It is necessary to create separate element information for leads of different width and length....

Read Article →

January 9, 2020 • By admin

Vision Type 144 (149) Land Grid Array (Lga) Parts For NXT Vision Types Of Part Data Settings On Fuji NXT

Enter the body size and element information in part data. Vision type 144 uses the body center while vision type 149 uses the part center....

Read Article →

January 8, 2020 • By admin

Vision Type 143 (148) Ceramic Column Grid Array (Ccga) Parts For NXT Vision Types Of Part Data Settings On Fuji NXT

Enter the body size and element information in part data. Vision type 143 uses the body enter while vision type 148 uses the part center....

Read Article →

January 6, 2020 • By admin

Vision Type 140 (145) Flip-chips For NXT Vision Types Of Part Data Settings On Fuji NXT

Enter the body size and element information in part data. Vision type 140 uses the body center while vision type 145 uses the part center....

Read Article →

January 3, 2020 • By admin

Vision Type 123 (128) Ic-Type Leaded Parts And Vision Type 124 (129) J-Leaded Parts For NXT Vision Types Of Part Data Settings On Fuji NXT

Enter the body size and element information in part data. Due to the use of frontlighting, there are cases where the acquired image may vary...

Read Article →

January 2, 2020 • By admin

4. Caution: Please Refrain From Splicing The Tape Together by Nichia

“Splicing” stands for the tape joint process while the mounter is operated. When there are a few LEDs left on the reel which is loaded...

Read Article →

December 31, 2019 • By admin

3-4-2. Change The Peeling Point For Avoiding Led Tilting Within The Cavity by Nichia

3-4. Problem 4: LED tilting within the cavity due to vibration of the emboss carrier tape When an excessive vibration is applied to the emboss...

Read Article →

December 30, 2019 • By admin

3-4-1. Slow Down The Feeding Speed For Avoiding Led Tilting Within The Cavity by Nichia

3-4. Problem 4: LED tilting within the cavity due to vibration of the emboss carrier tape When an excessive vibration is applied to the emboss...

Read Article →

December 27, 2019 • By admin

Vision Type 80 Round Shaped Parts For NXT Vision Types Of Part Data Settings On Fuji NXT

Enter only the body size in part data. There is no need to enter element information. The reference point for the part is the part...

Read Article →

← Prev 1 … 62 63 64 65 66 … 115 Next →

SMT Industry Blog & Knowledge Base

SMTBOX Assistant