SMT Industry Blog & Knowledge Base

Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.

December 14, 2019 • By admin

3-1-1. Nozzle Insertion System Of Problem 1: Damage To The Lens During The Mounting Process For Mounting Techniques By Nichia

3-1. Problem 1: Damage to the lens during the mounting process Nichia establishes the optimal absorption method and the optimal cavity shape/size for each LED...

Read Article →

December 13, 2019 • By admin

2. Mounting Failures in LEDs with a Lens by NICHIA

Many LEDs with a lens have been developed for higher performance. Such lenses are mostly made of resin; when external stress is applied to the...

Read Article →

December 12, 2019 • By admin

1. Introduction of Mounting Techniques for LEDs with a Lens by NICHIA

As LEDs have recently been miniaturized and highly-functional, higher mounting technologies are necessary for them. It has been difficult to mount such advanced LEDs because...

Read Article →

December 11, 2019 • By admin

Vision Type 65 Aluminum Electrolytic Capacitors For NXT Vision Types of Part Data Settings on FUJI NXT

Enter the body size in part data. There is no need to enter element information. Be sure to include projections such as leads in the...

Read Article →

December 10, 2019 • By admin

Vision Type 62 Resistors Networks MELFs For NXT Vision Types of Part Data Settings on FUJI NXT

Enter the body size in part data. There is no need to enter element information. The reference point for the part is the part center.

Read Article →

December 7, 2019 • By admin

Vision Type 61 63 Tantalum Spragues (polarity check performed) for NXT Vision Types of Part Data Settings on FUJI NXT

Vision Type 61 Tantalum Spragues Vision Type 63 Tantalum Spragues (polarity check performed) Enter the body size in part data. There is no need to...

Read Article →

December 6, 2019 • By admin

Alarm Display: A. 410. Alarm Name: Undervoltage on Sony SI-F209

Alarm Display: A. 410 Alarm Name: Undervoltage 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: A SERVOPACK board...

Read Article →

December 5, 2019 • By admin

Vision Type 60 Rectangular Chips for NXT Vision Types of Part Data Settings on FUJI NXT

Enter the body size in part data. There is no need to enter element information. The reference point for the part is the part center.

Read Article →

December 3, 2019 • By admin

NXT Vision Types For Vision Type Details of Part Data Settings on FUJI NXT

This section provides a list of the vision types for the NXT and an explanation of the processing method used for each type. It is...

Read Article →

← Prev 1 … 64 65 66 67 68 … 115 Next →

SMT Industry Blog & Knowledge Base

SMTBOX Assistant