Part Reference Point For Vision Type Details of Part Data Settings on FUJI NXT
The part reference point is defined as the point on the part that is aligned with the placing coordinates on the panel when the part...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
Alarm Display: A. 400. Alarm Name: Overvoltage on Sony SI-F209
Alarm Display: A. 400 Alarm Name: Overvoltage 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: A SERVOPACK board...
Read Article → Alarm Display: A. 330. Alarm Name: Main Circuit Wiring Error on Sony SI-F209
Alarm Display: A. 330 Alarm Name: Main Circuit Wiring Error 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause:...
Read Article → Alarm Display: A. 320. Alarm Name: Regenerative Overload on Sony SI-F209
Alarm Display: A. 320. Alarm Name: Regenerative Overload. 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: A SERVOPACK...
Read Article → Alarm Display: A. 300. Alarm Name: Regeneration Error Detected on Sony SI-F209
Alarm Display: A. 300 Alarm Name: Regeneration Error Detected 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: A...
Read Article → Alarm Display: A. 100. Alarm Name: Over current (Heat Sink Overheated) on Sony SI-F209
Alarm Display: A. 100 Alarm Name: Over current (Heat Sink Overheated) 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON....
Read Article → Alarm Display: A.050 Alarm Name: Combination Error on Sony SI-F209
Alarm Display: A.050 Alarm Name: Combination Error Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: The SERVOPACK and servomotor...
Read Article → How To Select A P_Pattern Flowcharts on FUJI NXT?
1. Selecting a p_pattern flowcharts for frontlight leaded parts 2. Selecting a p_pattern flowcharts for frontlight bumped (ball leaded) or columned parts 3. Selecting a...
Read Article → P_pattern 33 And 34 Of P Pattern Details On FUJI NXT Scalable Placement Platform
These cannot be used on the NXT. Basically, these types are the same as the types 23 and 24. The major difference is that with...
Read Article →