Having issues with Alarm Display: A. 320. Alarm Name: Regenerative Overload on Sony SI-F209? Read our step-by-step SMT maintenance solution below. If you require replacement feeders, nozzles, or sensors, contact SMTBOX for OEM-compatible parts.
Alarm Display: A. 320.
Alarm Name: Regenerative Overload.
1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON.
Cause: A SERVOPACK board fault occurred.
Corrective Actions: Replace the SERVOPACK.
2. Situation at Alarm Occurrence: Occurred when the main circuit power supply was turned ON.
Cause: The power supply voltage is 270 V or more.
Corrective Actions: Correct the input voltage.
3. Situation at Alarm Occurrence: Occurred during normal operation (large increase of regenerative resistor temperature).
Cause: The regenerative energy is excessive, and the regenerating state continued.
Corrective Actions: Select a proper regenerative resistance capacity, or reconsider the load and operation conditions.
4. Situation at Alarm Occurrence: Occurred during normal operation (small increase of regenerative resistor temperature).
Cause: The setting of parameter Pn600 is smaller than the external regenerative resistor’s capacity.
Corrective Actions: Correct the set value of parameter Pn600.
Cause: A SERVOPACK fault occurred.
Corrective Actions: Replace the SERVOPACK.
5. Situation at Alarm Occurrence:
Cause: The regenerative energy is excessive.
Corrective Actions: Select a proper regenerative resistance capacity, or reconsider the load and operation conditions.
Our editorial team consists of senior SREs, mechanical engineers, and SMT assembly specialists with over 15 years of industry experience in PCB assembly line optimization. All technical articles are reviewed and verified for mechanical and electronic compatibility before publication.