P_pattern 23 And 24 Of P Pattern Details On FUJI NXT Scalable Placement Platform
These cannot be used on the NXT. The lead tip and width are detected and the results are used to determine the part position similar...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
P_pattern 16 And 15 Of P Pattern Details On FUJI NXT Scalable Placement Platform
Basically, these are the same as p_pattern types 5 and 6. The major difference is that with these p_patterns, the inward pointing lead tip is...
Read Article → P_pattern 13 And 14 Of P Pattern Details On FUJI NXT Scalable Placement Platform
Basically, these are the same as p_pattern types 3 and 4. The major difference is that with these p_patterns, the outward pointing lead tip is...
Read Article → P_pattern 11 And 12 Of P Pattern Details On FUJI NXT Scalable Placement Platform
These are used for parts with leads that are attached to the body at both ends of the leads and whose lead detection is not...
Read Article → P_pattern 5 And 6 Of P Pattern Details On FUJI NXT Scalable Placement Platform
The leads point towards the inside of the body of the part (opposite from types 3 and 4) and are attached to the body at...
Read Article → P_pattern 3 And 4 Of P_Pattern Details On FUJI NXT Scalable Placement Platform
The leads extend out from the body of the part and are attached to the body at the base of the lead. Due to this,...
Read Article → P_pattern 1 And 2 Of P_Pattern Details On FUJI NXT Scalable Placement Platform
Because the lead and body boundary is clearly defined, all four sides of the leads are checked and the results are used to determine the...
Read Article → P_Pattern Diagram Explanation Of P_Pattern Details On FUJI NXT Scalable Placement Platform
P_pattern diagram displayed in the host system. Checked position caliper not used to determine positioning*1. Checked position calipers used to determine positioning*1. Note: *1 The...
Read Article → P_Patterns Not Supported By The NXT Of P_Pattern Details On FUJI NXT Scalable Placement Platform
The following p_patterns are not valid for the NXT due to background conditions and/or the use of backlighting. P_pattern: 24 Example Part: SOJ Details：Used only...
Read Article →