SMT Industry Blog & Knowledge Base

Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.

November 6, 2019 • By admin

P_Patterns Used For The NXT of P_pattern Details On FUJI NXT Scalable Placement Platform

Definition: P_pattern Details The p_pattern specifies the way the lead appears to the vision processing system and how the processing of the lead information for...

Read Article →

November 5, 2019 • By admin

Package Data For Part Data Settings on FUJI NXT Scalable Placement Platform

The following list is the part data settings used by the NXT for package data. 1. Package Information tab The settings for items with an...

Read Article →

November 4, 2019 • By admin

Shape Process Details Of Shape Data For Part Data Settings on FUJI NXT Scalable Placement Platform

1. Body Location Pin Length Specify the length in mm of any locating pins on the shape if they are present. This setting is especially...

Read Article →

November 1, 2019 • By admin

Shape Information Details Of Shape Data For Part Data Settings on FUJI NXT Scalable Placement Platform

1. Body Length (X): Specify X-direction length of the part’s body size. Width (Y): Specify Y-direction length of the part’s body size. Length Tolerance (X):...

Read Article →

October 31, 2019 • By admin

Shape Information Tab Of Shape Data For Part Data Settings on FUJI NXT Scalable Placement Platform

The following list is the part data settings used by the NXT for shape data. 1. Shape Information tab The settings for items with an...

Read Article →

October 30, 2019 • By admin

4. Introduction and Part Data of Part Data Settings on FUJI NXT Scalable Placement Platform

4.1 Introduction The NXT requires part data the same as other Fuji machines and the most of part data settings are the same as other...

Read Article →

October 29, 2019 • By admin

Board Support Block / Pins & Panasert Vacuum Box support / Pins For Panasonic SP60P-L High Speed Screen Printer

#35. P/N: KXFX04HFA00 | Board Support Block (L) #36. P/N: KXFX04CGA00 | Board-Support Pins L #37. P/N: N610001559AA | Panasert Vacuum Box support #38. P/N:...

Read Article →

October 28, 2019 • By admin

Serial Connections on Motorola MVME162P4 VME Embedded Controller

The MVME162P4 uses a Zilog Z85230 serial port controller to implement the two serial communications interfaces. Each interface supports: 1. CTS, DCD, RTS, and DTR...

Read Article →

October 25, 2019 • By admin

Installation Instructions on Motorola MVME162P4 VME Embedded Controller

This section covers: A. Installation of IndustryPacks (IPs) on the MVME162P4 B. Installation of the MVME162P4 in a VME chassis C. System considerations relevant to...

Read Article →

← Prev 1 … 67 68 69 70 71 … 115 Next →

SMT Industry Blog & Knowledge Base

SMTBOX Assistant