Vision Type 74 Trimmer Resistors, Trimmer Capacitors (Polarity Check Performed)
It is necessary to enter the body size and element information in part data. Enter the lead quantity (2 or 3), lead width and length,...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
Vision Type 72 HEMT (Supplied at 0 degrees) and Vision Type 73 HEMT (Supplied at 45 degrees) For Fuji NXT
It is necessary to enter the body size and element information in part data. The reference point for the part is the part center. If...
Read Article → Vision Type 71 Trimmer Resistors Trimmer Capacitors For Nxt Vision Types Of Part Data Settings On Fuji NXT
Enter the body size in part data. There is no need to enter element information. Note that projections such as leads are included in the...
Read Article → Vision Type 70 (75) Power Transistors For NXT Vision Types Of Part Data Settings On Fuji NXT
It is necessary to enter the body size and element information in part data. The reference point is the body center with vision type 70,...
Read Article → 3-3-2. Change The Peeling Angle On 3-3. Problem 3: Led Tilting Within The Cavity Due To Its Adhesion To The Top Cover Tape by Nichia
LED lenses are made of resin. Therefore, the lenses sometimes adhere to the top cover tape due to the resin’s stickiness. When the cover tape...
Read Article → 3-3-1. Slow Down The Feeding Speed For 3-3. Problem 3 Led Tilting Within The Cavity Due To Its Adhesion To The Top Cover Tape by Nichia
LED lenses are made of resin. Therefore, the lenses sometimes adhere to the top cover tape due to the resin’s stickiness. When the cover tape...
Read Article → 3-2. Problem 2: Absorption Error Due To Air Leak
Correction of the Absorption Point: Above screenshots stand for Panasonic CM Mounter(left one) and Yamaha YS Mounter(right one). Please adjust the mounter to ensure that...
Read Article → 3-1-2. Non-Insertion Nozzle System Of Problem 1: Damage To The Lens During The Mounting Process For Mounting Techniques By Nichia
3-1. Problem 1: Damage to the lens during the mounting process Nichia establishes the optimal absorption method and the optimal cavity shape/size for each LED...
Read Article → Wishing You a Merry Christmas and a Blessed New Year 2020
Dear Customers and Partners, Christmas is the gentlest, loveliest festival of the revolving year — and yet, for all that, when it speaks, its voice...
Read Article →