SMT Industry Blog & Knowledge Base

Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.

March 8, 2019 • By admin

Machine Control Specifications of Machine Control System on Fuji CP-842E CP-842ME High-Speed Chip Placer

Acceleration control (XY-table): In 5 levels are UHi, Hi, Mid, Low, ULow. Controllable axes: A total of 12 axes are Cam, X, Y, Z, D1,...

Read Article →

March 7, 2019 • By admin

Parts Supply Table (D-axis) of Fuji CP-842E CP-842ME High-Speed Chip Placer

Notes: a. If incorrect orientation is detected, a vision error is issued and the part is rejected. This function can be used on the condition...

Read Article →

March 6, 2019 • By admin

Camera Unit of Fuji CP-842E CP-842ME High-Speed Chip Placer

The machine is equipped with two cameras, each camera being used to process different parts. A high resolution narrow view camera is used to acquire...

Read Article →

March 5, 2019 • By admin

SMT Nozzles of Fuji CP-842E CP842ME High-Speed Chip Placer

Nozzles are attached to each head, with the following nozzles being available for the CP-842E/842ME. Plate: φ8 #Nozzle diametre: φ0.27 | Nozzle code: For 0402...

Read Article →

March 3, 2019 • By admin

Placing Head of Fuji CP-842E CP842ME Chipshooter

The function of each of the 16 stations on the turret are detailed below. #1. Pick-up part from the device table (Adjustable pick-up height) #2....

Read Article →

February 28, 2019 • By admin

Maintain the sleeves of ASM SIPLACE X-Series Preventive Maintenance

You will need the following tools and consumables for maintaining the sleeves. Laboratory gloves Ethyl alcohol Lint-free cloths Cottonwool buds Microtips (cottonwool buds) drill bit...

Read Article →

February 27, 2019 • By admin

Travel range and velocity monitoring X- and Y- Axes on the Siemens Siplace X2

The travel range of the X- and Y-axes will be determined automatically with Sitest program. That means, during calibration of travel range the axis run...

Read Article →

February 26, 2019 • By admin

Sub Part list of Hanwha Samsung Techwin 8mm SMN Tape Feeder SM DECAN IT 8mm4P SBFB32010K 8mm2P SBFB32000K

New SMN IT Pneumatic Tape Feeder For SM / DECAN Series 8MM 4P: P/N: SBFB32010K 8MM 2P: P/N: SBFB32000K #A-1 P/N: J90650156B | Probe Cable...

Read Article →

February 25, 2019 • By admin

Option Parts of Panasonic NPM-TT Production Modular

Model No. NM-EJM3D Dual Conveyor P/N: N610136587AA | Dual Conveyor:NPM-TT P/N: N610136588AA | Board Holder For Dual:NPM-TT P/N: N610136590AA | Board Support Block For Dual:NPM-TT...

Read Article →

← Prev 1 … 86 87 88 89 90 … 115 Next →

SMT Industry Blog & Knowledge Base

SMTBOX Assistant