Having issues with Machine Control Specifications of Machine Control System on Fuji CP-842E CP-842ME High-Speed Chip Placer? Read our step-by-step SMT maintenance solution below. If you require replacement feeders, nozzles, or sensors, contact SMTBOX for OEM-compatible parts.
Acceleration control (XY-table): In 5 levels are UHi, Hi, Mid, Low, ULow.
Controllable axes: A total of 12 axes are Cam, X, Y, Z, D1, D2, Pθ, Fθ, Rθ, NC, NZ and NY.
CPU: Intel Pentium type.
Maximum number of input sequences: 5000 sequences/PCB (this is the total number of sequences for both PCBs.
Program storage capacity: Limited only by the size of the hard disk.
Data input method (units): Fuji Flexa (X-, Y- and Z-axis: 0.01 mm / θ-axis: 0.01°.
Communication: Ethernet Lan.
Control panel: Color LCD touch panel.
Optical correction: For PCB positioning and part pick-up displacement.
Notes:
1. Pentium is a registered trademark of Intel corporation.
2. Fuji Flexa is the host system used for assembly data administration and transmission. It is necessary to install the host system on a suitable computer. The computer running the host should be provided by the user prior to taking delivery of the machine.
3. Ethernet cable (10 BASE-T cable, category 5; 100 m) should be prepared by the user prior to taking delivery of the machine.
Our editorial team consists of senior SREs, mechanical engineers, and SMT assembly specialists with over 15 years of industry experience in PCB assembly line optimization. All technical articles are reviewed and verified for mechanical and electronic compatibility before publication.