Support Centre – SMT F.A.Qs / SMT M.R.O. / SMT Parts List / SMT News Letter
- 3-3-2. Change The Peeling Angle On 3-3. Problem 3: Led Tilting Within The Cavity Due To Its Adhesion To The Top Cover Tape by Nichia
- 3-3-1. Slow Down The Feeding Speed For 3-3. Problem 3 Led Tilting Within The Cavity Due To Its Adhesion To The Top Cover Tape by Nichia
- 3-2. Problem 2: Absorption Error Due To Air Leak
- 3-1-2. Non-Insertion Nozzle System Of Problem 1: Damage To The Lens During The Mounting Process For Mounting Techniques By Nichia
- Wishing You a Merry Christmas and a Blessed New Year 2020
- 3-1-1. Nozzle Insertion System Of Problem 1: Damage To The Lens During The Mounting Process For Mounting Techniques By Nichia
- 2. Mounting Failures in LEDs with a Lens by NICHIA
- 1. Introduction of Mounting Techniques for LEDs with a Lens by NICHIA
- Vision Type 65 Aluminum Electrolytic Capacitors For NXT Vision Types of Part Data Settings on FUJI NXT
- Vision Type 62 Resistors Networks MELFs For NXT Vision Types of Part Data Settings on FUJI NXT
- Vision Type 61 63 Tantalum Spragues (polarity check performed) for NXT Vision Types of Part Data Settings on FUJI NXT
- Alarm Display: A. 410. Alarm Name: Undervoltage on Sony SI-F209
- Vision Type 60 Rectangular Chips for NXT Vision Types of Part Data Settings on FUJI NXT
- NXT Vision Types For Vision Type Details of Part Data Settings on FUJI NXT
- Part Reference Point For Vision Type Details of Part Data Settings on FUJI NXT
- Alarm Display: A. 400. Alarm Name: Overvoltage on Sony SI-F209
- Alarm Display: A. 330. Alarm Name: Main Circuit Wiring Error on Sony SI-F209
- Alarm Display: A. 320. Alarm Name: Regenerative Overload on Sony SI-F209
- Alarm Display: A. 300. Alarm Name: Regeneration Error Detected on Sony SI-F209
- Alarm Display: A. 100. Alarm Name: Over current (Heat Sink Overheated) on Sony SI-F209