SMT Industry Blog & Knowledge Base

Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.

May 27, 2018 • By admin

Part 2 – Setting: Fix Rail. Machine Setup of Fuji NXT Scalable Placement Platform

Setting: Fix Rail. Description: This specifies whether or not the reference rail for the second lane can move to different positions. If this is set...

Read Article →

May 25, 2018 • By admin

Part 1 – Configuring a FUJI NXT SMT machine

Data about the configuration of the NXT must be entered. When an NXT machine with a certain name is added for the first time, the...

Read Article →

May 24, 2018 • By admin

Required Tools and Jigs For Replacing Parts Camera of FUJI QP242 Machine

Required Tools: 1 Set of metric allen wrenches. Required Jigs: Nozzle center calibration (Camera 4, 6, 7). Part number: ABHPJ6312 Camera resolution measurement jig (Camera...

Read Article →

May 23, 2018 • By admin

General information of Replacing Parts Camera of FUJI QP242 Machine

Responsible for inspection of parts on the nozzle, the parts camera is the most important component of high precision, high quality board production. Slight misalignment...

Read Article →

May 22, 2018 • By admin

ASM Siplace(Siemens) C&P20 Head Introduction and Overview

The C&P20 head functions according to the collect & place principle and has 20 segments. The C&P20 head is suitable for configuration at any machine...

Read Article →

May 21, 2018 • By admin

Error code 101 on PHILIPS ASSEMBLEON ACM

Error text: Order does not exist. Description: There is no existing order name. Cause: An order name is required. Solution: Enter an existing order name.

Read Article →

May 20, 2018 • By admin

Differences in Specifications between Panasonic RHS2 and RHS2B

These are differences in specifications between Panasonic rhs2 and rhs2b high speed radial lead component insertion machines, Item RHS2 RHS2B Main body (Handwheel) Wheel axis...

Read Article →

May 20, 2018 • By admin

Part 3 of How to Replace X-Axis Motor of FUJI QP-242E Machine

Installation 1. Connect the two (2) electrical connectors from the motor and attach the motor mechanically to the machine. Note: Do not attach the timing...

Read Article →

May 17, 2018 • By admin

Part 2 of How to Replace X-Axis Motor of FUJI QP-242E Machine

Preparation 1. Receive the current Proper data to the host computer. 2. Change the Proper Data Max Limit Position X to 5000, for rear load...

Read Article →

← Prev 1 … 109 110 111 112 113 … 115 Next →

SMT Industry Blog & Knowledge Base

SMTBOX Assistant