List of Hitachi / UIC SMT Tape Feeder with Splicing Detection Unit
List of SMT Tape Feeder with Splicing Detection Unit Machine Model: Universal UIC Quadris-3 5588B 5588C / Hitachi GHX-3 GHX-3J Chip Mounter System GD-18080B =...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
Offset Setting Mode of Universal 8mm High Performance DL-60 SMT Feeder
UIC Universal 8 mm High Performance DL-60 Gold Plus 7 inch Dual Lane Spliceable Tape Feeder Part Number 49889212 Offset Setting Mode 1. Make sure...
Read Article → Part 1 – Alarm Display: A.020 of Sony SI-209 IC Mounter
Alarm Display: A.020. Alarm Name: Parameter Checksum Error 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: The control...
Read Article → Nozzle Compatibility For Philips Assembleon AX-301 and AX-501 Placement Machine
For Placement Head Laser Vision = PH-LV. SMT Nozzle CPL1: Length=0.4mm, width=0.2mm (e.g. 01005) SMT Nozzle CPL2: Length=0.6-1.0mm, width=0.3-0.5mm (e.g. 0201-0402) SMT Nozzle CPL3: Length=1.0-2.1mm,...
Read Article → ASM SIPLACE (Siemens) X2 X3 X4 X Configuration Options
Legend 1. Placement area 1 2. Placement area 2 Placement heads – 6 = C&P6 head – 12 = C&P12 head – 20 = C&P20...
Read Article → Philips Assembleon A-Series AX-501 AX-301 AX-201 Placement Machine SMT Feeders List
Twin bulk feeder For feeding capacitors and resistors in bulk case Available feeder types: C0201, RC0402, RC0603, RC0805, MELF0604, Melf0805 Single tray feeder Single tray...
Read Article → Important Points Required for SMT Nozzles Selections of LED(Light-Emitting Diode)
A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode that emits light when activated. When a suitable current...
Read Article → Part 2.2 – Setting: Board Flow. Machine Setup of Fuji NXT Scalable Placement Platform
Setting: Board Flow Description: This specifies the direction in which the panels flow through the machine. This settings does not actually control the direction in...
Read Article → Part 2.1 – Setting: Rail Width. Machine Setup of Fuji NXT Scalable Placement Platform
Setting: Rail Width. Description: This setting only displays when the setting for [Fix Rail] is “Yes”. This setting specifies the location at which the reference...
Read Article →