IP Bus Clock (J14) on Motorola MVME162P4 VME Embedded Controller
Header J14 selects the speed of the IP bus clock. The IP bus clock speed may be 8MHz or it may be set synchronous to...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
Specification: Component Feeding Of ASM Siplace(Siemens) HF High-Flexibility SMD Placement System
1. Component Changeover Table Innovation: Automatic coupling and uncoupling Combined interface for both electrical and pneumatic connections: Cables no longer have to be connected and...
Read Article → Electric Panel Ass’y of Samsung SM411 SM411N Fast & Flexible Chip Shooter
#A-1 P/N: J90781004A | Part Name: REAR_ELECTRIC_PANEL_ASSY | Qty: 1 #A-2 P/N: AM03-001671A | Part Name: SM411N_R_ELECTRIC_PANEL_ASSY #1 P/N: J3501040A | Part Name: MAGNETIC CONTACTOR[LC1D096BD,...
Read Article → Introduction of KNS Assembleon iFeeder family (4-88 mm)
IMPROVEMENT DESCRIPTION: In comparison with its predecessor ITF3, the new iFeeder 4-56mm has a new base plate made of aluminum. The top guide for 4...
Read Article → Machine Programming Introduction of DEK 265 GSX Lt Screen Printer
STAGE 1: Power Up and Log On STAGE 2A: Loading a Product File – Using Function Keys STAGE 2B: Loading a Product File – Using...
Read Article → Error Code: 106 / 107 / 108 on KNS Philips Assembleon ACM
Error Code:106 Error Text: Invalid selection state Description:Requested action can not be executed on the selected order because of an invalid selection state. Error Code:107...
Read Article → VME System Controller (J1) on CPU2 Motorola MVME162P-344SE Yamaha Hitachi Sanyo 6300901030
The MVME162P4 board is factory-configured in “automatic” system controller mode with a jumper across J1 pins 2-3. In this configuration, the MVME162P4 determines whether it...
Read Article → Weights for each type of module, base, and tray unit used in FUJI NXT
About Machine Weight: Weights for each type of module, base, and tray unit used in the NXT are listed below. The actual weight of the...
Read Article → Alarm Display: A.021, Alarm Name: Parameter Format Error Occurred on Sony SI-F209
Alarm Display: A.021 Alarm Name: Parameter Format Error Occurred Situation at Alarm Occurrence: when the power was turned ON again after writing the parameter with...
Read Article →