Error Code: 213 Error Text: Single step during error recovery finished, press retry to resume. Description: The machine is in step mode an has finished a single step during the retry of an error. Solution: Press retry again to proceed with the next step in recovering the error.
Category Archives: SMT Machines MRO
Alarm Display: A.CC0 Alarm Name: Multi-turn limit disagreement Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: The parameter settings for the SERVOPACK are incorrect. Corrective Actions: Correct the setting of Pn205 (0 to 65535). Cause: The multi turn limit value for the encoder is not set or was changed…. Continue reading about Alarm code: A.CC0. Alarm Name: Multi-turn Limit Disagreement on Sony SI-F209 Electronic Part Mounter
#1. P/N: MC03-000169 | Part name: Bearing Ball Bearing 689Zz1 Nsk 9 17 | Qty: 1 #2. P/N: HP07-000165 | Part name: Packing Y Packing Myn 11 Sakagami | Qty: 1 #3. P/N: FC18-001089 | Part name: Ring O O Ring D20.0 W1.0 Nbr Kyowa | Qty: 1 #4. P/N: MC19-000389A | Part name: Shaft… Continue reading about HSH(3/4) (Option) Auto Sensing Head on Hanwha (Samsung Techwin) Excellent Modular EXCEN PRO (D) (M) (L)
Alarm Display: A.Cb0 Alarm Name: Encoder Echo back Error Situation at Alarm Occurrence: Occurred when the control power supply was turned ON or during operation. Cause: The encoder wiring and contact are incorrect. Corrective Actions: Correct the encoder wiring. Cause: Noise interference occurred due to incorrect encoder cable specifications. Corrective Actions: Use tinned annealed copper… Continue reading about Alarm code: A.Cb0. Alarm Name: Encoder Echo back Error on Sony SI-F209 Electronic Part Mounter
Fujitrax Verfier issues parts out warnings based upon the user specified settings. When a parts out warning occurs and the feeder is to be replaced, the operator has time to get a new reel, set it on the replacement feeder, and create an ID or perform a quick verify. Once these steps are performed, when… Continue reading about 8.7.3 Replacing Feeders for 8.7 Resupplying Parts During Production of 8. Fujitrax Verifier on FUJI NXT
Error Code: 212 Error Text: Communication failure in system Description: A communication error has been occurred between the system controller and the process controller. Cause: – No connection between the two systems. – Malfunctioning network card on either system. – A software problem in the machine. Solution: – Check the coax cable connection between the… Continue reading about Error Code: 212. Communication Failure In System on KNS Philips Assembleon ACM SMT Machine
Error Code: 207 Error Text: Retry action failed Description: The retry action is unsuccessful. Cause: A machine or process error occurs during the retry action. Solution: – Check error cause and solve error. – Retry and continue. – If the retry action still fails, restart the system and report error to your service representative. Error… Continue reading about Error Code: 207, 208, 209, 210, 211 on KNS Philips Assembleon ACM SMT Machine
Alarm Display: A.CA0 Alarm Name: Encoder Parameter Error Situation at Alarm Occurrence: Occurred when the control power supply was turned on. Cause: An encoder fault occurred. Corrective Actions: Replace the servomotor. Cause: A Servopack board fault occurred. Corrective Actions: Replace the servopack.
Fujitrax Verfier issues parts out warnings based upon the user specified settings. When a parts out warning occurs and splicing is to be performed, the operator has time to get a new reel and splice it to the old reel before the parts run out. During splicing, a check is performed to ensure that the… Continue reading about 8.7.2 Splicing Tape for 8.7 Resupplying Parts During Production of 8. Fujitrax Verifier on FUJI NXT
#A. P/N: AM03-022528A | Part name: Assy Feeder Base Dt Docking Cart R 900 S | Qty: 1 | Remarks: 900 #A. P/N: AM03-022473A | Part name: Assy Feeder Base Dt Docking Cart R 900 E | Qty: 1 | Remarks: 900 ESD #A. P/N: AM03-022525A | Part name: Assy Feeder Base Dt Docking Cart… Continue reading about Hanwha EXCEN PRO Docking Cart (1/3) Direct Tray Docking Cart Option AM03-022528A AM03-022473A AM03-022525A AM03-022475A