Suppressor Section on Hitachi Yamaha SMT Tape Feeder 72mm GT-72001B GD-72001B
#303. P/N: 630 166 8642 | Lever(Sup) #307. P/N: 630 132 4852 | Pin Hinge(Sup) #309. P/N: 630 158 3266 | Spring Torsion #312. P/N:...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
IP Bus Strobe (J19) on Motorola MVME162P4 VME Embedded Controller
Some IP bus implementations make use of the Strobe? signal (pin AA19 on the Petra ASIC) as an input to the IP modules from the...
Read Article → Part 4 – Setting auto backup pins (from FUJI NXT V3.10 and higher)
This is used with the optional automatic backup pin function on the NXT. It is necessary to have Fuji Flexa V1.5.4 or higher and NXT...
Read Article → Error Code: 124 / 125 / 126 on KNS Philips Assembleon ACM
Error Code:124 Error Text: Operational failed because GEM is not operational. Description: The requested operation could not be performed because GEM is not operational. Cause:...
Read Article → Cover Tape Winding Section on Hitachi Yamaha SMT Tape Feeder 72mm GT-72001B GD-72001B
#201. P/N: 630 137 4949 | Base #203. P/N: 630 126 6091 | Assy Gear(Makitori) #203-01. P/N: 630 126 6022 | Gear(Makitori) 1 #203-02. P/N:...
Read Article → Error Code: 121 / 122 / 123 on KNS Philips Assembleon ACM
Error Code:121 Error Text: Unable to execute the order related command. Cause: – A similar command is currently being executed. Solution: Wait till the current...
Read Article → Section 8 – Specifying the available feeders for a machine of Part 3: Entering FUJI NXT Configuration Data
By setting which feeders are available for the NXT machine, an unavailable feeder will not be selected when optimization is performed. 1. Select the [Top]...
Read Article → Tape Driving Section on Hitachi Yamaha SMT Tape Feeder 72mm GT-72001B GD-72001B
#101 P/N: 630 155 5652 | Assy Gear((Worm)) #101-03 P/N: 630 144 3935 | Collar(Bearing) #101-06 P/N: 630 144 3942 | Pulley Timing #101-07 P/N:...
Read Article → Alarm Display: A.040 Alarm Name: Parameter Setting Error 1 on Sony SI-F209
Alarm Display: A.040 Alarm Name: Parameter Setting Error 1 Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: Parameter is...
Read Article →