Splicing Detection Unit DS-24320 for Hitachi Yamaha Motorized 24/32mm Tape Feeder GD-24321B
#1 P/N: 630 154 4595 | Frame #2 P/N: 630 133 5346 | Assy Cover #3 P/N: 630 130 8319 | Cover(D) #4 P/N: 630...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
Error Code: 200 / 201 on KNS Philips Assembleon ACM
Error Code:200 Error Text: Unknown error detected. Description: The occurred error is unknown to the system. Cause: Mismatch between controllers or software layers. Solution: Report...
Read Article → Alarm Display: A.042 Alarm Name: Multiple Parameter Combinations Exceeding Set Range on Sony SI-F209
Alarm Display: A.042 Alarm Name: Multiple Parameter Combinations Exceeding Set Range. Situation at Alarm Occurrence: Occurred when the power was turned ON again after changing...
Read Article → Alarm Display: A.041 Alarm Name: Dividing Pulse Output Setting Error on Sony SI-F209
Alarm Display: A.041 Alarm Name: Dividing Pulse Output Setting Error Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause:The PC...
Read Article → Splicing Detection Unit DS-12160 for Hitachi Yamaha Motorized 12/16mm Tape Feeder GD-12161B
#1 P/N: 630 154 4595 | Frame #2 P/N: 630 130 8302 | Assy Cover #3 P/N: 630 130 8319 | Cover(D) #4 P/N: 630...
Read Article → Part 6 – Assigning an alternate feeder of FUJI NXT Machine Setting Procedures
The method for assigning a fixed alternate feeder for an NXT is different than other machines. For other machines an alternate feeder loop has to...
Read Article → How To Do Nozzle Select Position X-Axias or Y-Axias on FUJI QP-242E SMT Equipment
For nozzle station only 1. Press [SET] – [POSITION] – [Module #] – [NOZZLE] – [STATION] – [UP]. 2. Bring the head to a position...
Read Article → Part 3 – Reject Parts Box Position X/Y on FUJI QP-242E Placement Machine
1. Install a 10 mm nozzle. 2. Align the nozzle center to the center of the parts eject box. 3. Press [SET] – [PROPER] –...
Read Article → Part 2 – MFU (Device) Origin Position D0 X/Y on FUJI QP-242E Placement Machine
How to measure x-axis and y-axis proper data. Here is the description: The MFU origin position sets the pulse count the head moves to when...
Read Article →