Category Archives: SMT Machines MRO

Tension (N): 20 N(16N ~ 25N) Frequency (Hz): 135 ± 10% Remarks: Use the U-505(Tension Gage)

Standard Timing Belt Tension (N): 35 Frequency (Hz): 252 ± 10% Remarks: Use the U-505(Tension Gage)

Standard Timing Belt Tension (N): 16.5 Frequency (Hz): 18.5 ± 10% Remarks: Use the U-505(Tension Gage) / Use the jig for tension check

Real Max(Min): Max(Min) error between command value and measured value Head1~Head6 : -0.500 ~ 0.500(deg) Err Max(Min) : Max(Min) error between measured value and compensated value Head1~Head6 : -0.200 ~ 0.200(deg)

FOV 25 ScaleX: 48.3~52.5 (μm/pixel) ScaleY: 48.3~52.5 (μm/pixel) R: -1~1(deg) FOV 15 ScaleX: 29.0~32.2 (μm/pixel) ScaleY: 29.0~32.2 (μm/pixel) R:-1~1(deg) FOV 10 ScaleX: 19.7~21.9 (μm/pixel) ScaleY: 20.2~21.4 (μm/pixel) R:-1~1(deg)

Offset X: -0.050 ~ 0.050(mm) Offset Y: -0.050 ~ 0.050(mm)

Offset X: -0.020 ~ 0.020(mm) Offset Y: -0.020 ~ 0.020(mm)

Fiducial Camera (FOV 12) ScaleX:23.0~27.0(μm/pixel) ScaleY: 23.0~27.0 (μm/pixel) R:-1~1(deg)

Fiducial Camera Offset (FOV 12) Offset X : 74.0mm ~ 76.0mm, Offset Y : -54.0mm ~ -56.0mm