Alarm Display: A.020. Alarm Name: Parameter Checksum Error 1. Situation at Alarm Occurrence: Occurred when the control power supply was turned ON. Cause: The control power supply lowered and sometimes ranged from 30 VAC to 60 VAC. Correction Action: Correct the power supply, and set Fn005 to initialize the parameter. Cause: The power supply was… Continue reading about Part 1 – Alarm Display: A.020 of Sony SI-209 IC Mounter
Category Archives: SMT Machines MRO
For Placement Head Laser Vision = PH-LV. SMT Nozzle CPL1: Length=0.4mm, width=0.2mm (e.g. 01005) SMT Nozzle CPL2: Length=0.6-1.0mm, width=0.3-0.5mm (e.g. 0201-0402) SMT Nozzle CPL3: Length=1.0-2.1mm, width=0.5-2.0mm (e.g. 0402-0603) SMT Nozzle CPL4: Length=1.6-3.2mm, width=0.8-2.5mm (e.g. 0603-1206) SMT Nozzle L3: Length=1.0-2.1mm, width=0.5-2.0mm (e.g. 0402-0603) Placement force > 2N SMT Nozzle L4: Length=1.6-3.2mm, width=0.8-2.5mm (e.g. 0603-1206) Placement force… Continue reading about Nozzle Compatibility For Philips Assembleon AX-301 and AX-501 Placement Machine
Legend 1. Placement area 1 2. Placement area 2 Placement heads – 6 = C&P6 head – 12 = C&P12 head – 20 = C&P20 head – TH = Twin head ( ) = Head configuration not recommended, as the components to be placed are limited in their height or the configuration has not been… Continue reading about ASM SIPLACE (Siemens) X2 X3 X4 X Configuration Options
Twin bulk feeder For feeding capacitors and resistors in bulk case Available feeder types: C0201, RC0402, RC0603, RC0805, MELF0604, Melf0805 Single tray feeder Single tray components, maximum of 30 JEDEC trays Intelligent tape feeder (ITF2/ITF3) From 8 mm to 88 mm tapes Twin tape feeder 8 mm (TTF) Doubles the capacity of 8 mm tapes… Continue reading about Philips Assembleon A-Series AX-501 AX-301 AX-201 Placement Machine SMT Feeders List
A light-emitting diode (LED) is a two-lead semiconductor light source. It is a p–n junction diode that emits light when activated. When a suitable current is applied to the leads, electrons are able to recombine with electron holes within the device, releasing energy in the form of photons.The LED package is made of 2 types… Continue reading about Important Points Required for SMT Nozzles Selections of LED(Light-Emitting Diode)
Setting: Board Flow Description: This specifies the direction in which the panels flow through the machine. This settings does not actually control the direction in the machine but is used for job related processing in Fuji Flexa.
Setting: Rail Width. Description: This setting only displays when the setting for [Fix Rail] is “Yes”. This setting specifies the location at which the reference rail for lane 2 will be fixed.
Setting: Fix Rail. Description: This specifies whether or not the reference rail for the second lane can move to different positions. If this is set to “Yes” the reference rail cannot move to different positions and a setting must be specified for [Rail Width]. This is the location that the re-fence rail for lane 2… Continue reading about Part 2 – Setting: Fix Rail. Machine Setup of Fuji NXT Scalable Placement Platform
Data about the configuration of the NXT must be entered. When an NXT machine with a certain name is added for the first time, the default information is used. This data must be checked and edited if it does not match the actual machine with that name. Entering NXT configuration data 1. Select the [Top]… Continue reading about Part 1 – Configuring a FUJI NXT SMT machine
Required Tools: 1 Set of metric allen wrenches. Required Jigs: Nozzle center calibration (Camera 4, 6, 7). Part number: ABHPJ6312 Camera resolution measurement jig (Camera 1). Part number: ABHPJ6011 Camera resolution measurement jig (Camera 2). Part number: ABHPJ6021 Camera resolution measurement jig (Camera 3). Part number: ABHPJ6031 Camera resolution measurement jig (Camera 4). Part number:… Continue reading about Required Tools and Jigs For Replacing Parts Camera of FUJI QP242 Machine