SMT Industry Blog & Knowledge Base

Alarm Contents: Regenerationover load alarm. 1. Operating Condition: When the motor is running (when stopped). Causes: Over-charging of the Servo-Amp. internal owing to the overload....

An alarm which has a “ * “ mark at the side of the Alarm Code No. in the above table cannot be cleared. In...

Alarm Contents: Servo-Amp. overload alarm. Operating Condition: After the main power is turned on When the motor is running. Causes: Overload larger than rated load....

Alarm Contents: Servo-Amp. over-heat alarm. Operating Condition: After the main power is turned on When the motor is running. Causes: Overheating of Servo-Amp above the...

Alarm Contents: Servo-Amp. Over current alarm Operating Condition: After the main power is turned on when the motor starts. Causes: Servo-Amp. damaged Motor UVW cable...

Position: Y Frame Bracket Maker: Hirose Pin: DF1B-2428SCF Connector: DF1B-6ES-2.5RC Working Tool: DF1B-TA2428SHC Others: The tool exclusively used for the cable connection must be used....

Alarm Contents: Servo-Amp. main power Low voltage alarm 1. Operating Condition: After supplying the control power. Causes: Servo-Amp. damaged Measures: Servo-Amp. change 2. Operating Condition:...

Alarm Contents: Servo-Amp control power. High voltage alarm. 1. Operating Condition: After supplying the control power Causes: X,Y Servo-Amp. regenerating resistor damage, disconnection Servo-Amp. damaged...

When an error occurs, the 7 segment LEDs of the motor drive will flicker. As well, the corresponding alarm code is generated. It is of...