Required Materials for X-Y Frame on Samsung Techwin SM321 SMT Component Assembly Machine
#1 P/N: J3212022A | Part Name:PHOTO SENSOR | Qty: 3 | Type: EE-SX674 #2 P/N: J7054139A | Part Name:SENSOR PLATE 2 | Qty: 1 #3...
Read Article → SMT Industry Blog & Knowledge Base
Deep dives into Surface Mount Technology. Expert advice on pick-and-place nozzle maintenance, feeder calibration, stencil printing efficiency, and yield optimization.
Required Materials of Back Up Table on Samsung Techwin SM321 SMT Component Assembly Machine
#1 | P/N: J7053801A | Part Name: BACK UP PLATE | Qty: 1 #2 | P/N: J7053799A | Part Name: UPPER PLATE | Qty: 1...
Read Article → Procedure To Replace The Motor For Width Adjustment of Samsung Techwin Component Placer SM321
1. Replace the motor in the same manner by referring to: (1) Manipulate the teaching box to move the X-Frame to the rear side. (2)...
Read Article → Conveyor Step Motor Replacement Procedure of Samsung Techwin Component Placer SM321
1. Replace the motor in the same manner by referring to: (1) Manipulate the teaching box to move the X-Frame to the rear side. (2)...
Read Article → Standard Value of Timing Belt Tension: Work Zone Belt For Driving Motor on Samsung SM321
Tension (N): 25 N Frequency (Hz): 450 ± 10% Remarks: Use the U-505(Tension Gage)
Read Article → Standard Value of Timing Belt Tension: Entry / Exit Belt for Driving Motor on Samsung SM321
Tension (N): 25 N Frequency (Hz): 337.5 ± 10% Remarks: Use the U-505(Tension Gage)
Read Article → Standard Value of Timing Belt Tension: Work zone belt for PCB transfer on Samsung SM321
Tension (N): 17 N (13.5N ~ 20.5N) Frequency (Hz): 177 ± 10% Remarks: Use the U-505(Tension Gage)
Read Article → Standard Value of Timing Belt Tension: Entry/exit belt for PCB transfer on Samsung SM321
Tension (N): 20 N(16N ~ 25N) Frequency (Hz): 135 ± 10% Remarks: Use the U-505(Tension Gage)
Read Article → Standard Value of Motor belt for Width Adjustment of Timing Belt on Samsung SM321
Standard Timing Belt Tension (N): 35 Frequency (Hz): 252 ± 10% Remarks: Use the U-505(Tension Gage)
Read Article →