This can only be performed for feeders that are in the current job. This cannot be performed for feeders to be used in the next job or jobs not in the machine. To set up feeders for such jobs, use External Changeover. This creates a relationship between the feeder and the part, and checks to ensure that the scanned part is the correct part for that position.
This currently cannot be used if AVL data is being used and the part number being used is not the part number in the AVL data with the priority setting.
Using Kit Manager
1. Open Kit Manger by using the shortcut in the start up menu.
2. Enter a user ID and then enter the appropriate password and service name for the master database.
3. Click [OK] and Kit Manager starts.
4. Double-click the factory folder in the left pane. The lines for this factory display.
5. Double-click the line with the NXT to be set. The machines for that line display.
6. Select the NXT machine on which to perform the Quick Verify.
7. Select [Quick Verify Mode] from the [Command] menu.
8. Select the feeder position for which to perform the quick verify.
9. Scan the DID of the part on the feeder that is for the selected position. The [Quick Verify] dialog box displays with the scanned DID in the [DID] text box.
10.Scan the feeder barcode and the result is entered in [FIDL] text box. If no errors occur, the dialog box automatically closes and a blue round icon displays in front of that feeder position.
11.Repeat these procedures for the other feeders.
Using Kit Handy
1. Start the Fuji Information Terminal and tap the Windows mark to display the [Start Menu]. Tap [Kit Handy] to display the [Log on] screen.
2. Enter the user ID and tap [OK]. It is possible to also scan the user ID. The Kit Handy menu displays.
3. Tap [Device Check] and the machine specification screen displays.
4. Enter or scan the name of the NXT machine for which to perform the device check and tap [OK].
5. Tap [Mode] from near the top of the display and then tap [Quick Verify].
6. Tap the device for which to perform the quick verify to select that device.
7. Scan the DID of the part on the feeder that is for the selected position. The screen changes to display the scanned DID in the [DID] text box.
8. Scan the feeder barcode and the result is entered in [FIDL] text box. If no errors occur, the dialog box automatically closes and a blue icon displays for that feeder position.
9. Repeat these procedures for the other feeders.