Error Code: 207, 208, 209, 210, 211 on KNS Philips Assembleon ACM SMT Machine

Error Code: 207

Error Text: Retry action failed

Description: The retry action is unsuccessful.

Cause: A machine or process error occurs during the retry action.

Solution:
– Check error cause and solve error.
– Retry and continue.
– If the retry action still fails, restart the system and report error to your service representative.

Error Code: 208

Error Text: Error reason unknown

Description: The process controller signalized errors, but no errors where reported, so the reason of the error is unknown.

Solution:
– Continue
– Report error to your service representative.

Error Code: 209

Error Text: Requested function can not be executed.

Description: The requested function (Calibration) can not be executed in this machine state.

Cause: A board is present in the machine. An error is not solved on the machine

Solution:
– Solve error (skip board).
– Remove board out of machine (skip board or using run-out function).

Error Code: 210

Error Text: Sorry, this function (%1) has not been implemented (yet)

Description: A function was activated that has not been implemented in the current software version.

Cause: Functions that are not complete yet, should not be accessible for the user. By mistake, this function is reachable for the user.

Solution:
– Clear the error, and do not use the function again, you should not be needing it.
– Report error to your service representative.

Error Code: 211

Error Text: System communication error on:%1

Description: An unexpected system error occurred.

Solution:
– Retry and continue.
– Restart the system.
– Report error to your service representative.

Written by: SMTBOX Editorial & Engineering Team

Our editorial team consists of senior SREs, mechanical engineers, and SMT assembly specialists with over 15 years of industry experience in PCB assembly line optimization. All technical articles are reviewed and verified for mechanical and electronic compatibility before publication.