SMTBOX – THT / SMT Machines Feeders, Nozzles and Spare Parts Supplier

Weights for each type of module, base, and tray unit used in FUJI NXT

About Machine Weight:

Weights for each type of module, base, and tray unit used in the NXT are listed below.

The actual weight of the machine should be calculated based on the type of module(s), base and tray-unit(s) being used. (Values listed below do not include the weight of any packing materials.)

Note:

1.Use a forklift which is suitable for the weight of the machine in question.
2.Be sure to insert the forklift forks at the prescribed position.
3.Use care to avoid bending the leveling bolts.
4.If the balance of a lifted machine is unstable, lower the machine immediately.
5.Raise and lower the machine slowly to avoid subjecting the machine to shocks.

NXT Description Weight (kg)

2M base = 345kg
Stand-alone control box for 2M base = 123kg
Indipendent 4M base = 720kg
Dependent 4M base = 680kg
8M base = 760kg
M3(S) module = 300kg
M6 module = 470kg
M6S module = 487kg
Trayunit -L (including 7 trays and magnets) = 150kg
Trayunit -M = 37kg

Exit mobile version